Product information:
Material: Environmentally friendly PLA or PETG material
Size: 8-inch dial with a diameter of 200MM
Movement: North Star Silent Scanning Movement
Craftsmanship: 3D printing DIY products (inevitably with layer patterns, no difference after hanging high, no post-processing such as painting)

Purchase Notice:
Yin Yang wall corner clock, no need to drill holes, can be hung on concave or convex corners of the room.
1. Use a corner clock to check if the wall angle is 90 degrees.
2. Cut the upper part of the attached traceless sticker (with the hole facing upwards) and press it tightly against the wall corner by about 1mm (there is no need to press it against the wall corner, as there is enough space for the hole).
3. Install the battery, adjust the time, and slide the clock from top to bottom into the hole.

Attention:
1. due to different measuring tools, manual measurement will have 1-2cm error, the specific size please receive the actual subject!
2. Physical shooting, due to differences in lighting, viewing angles, screen resolution, and color cognition. Different mobile phone display effects, computer display effects, and laptop display effects may cause color differences in the product. Please refer to the actual product for accuracy! 
3.Please use carbon batteries for the movement and do not use alkaline batteries. Alkaline batteries with high current can easily damage the movement. After the battery is depleted, it is necessary to replace the battery in a timely manner to avoid battery leakage and damage to the movement.
4. FDM 3D printed products are drawn line by line. There must be a seam from the bottom to the top of the production direction, with the inner corner clock adjusted to the back and the outer corner clock adjusted to the top.
5. All color classifications are determined by the wire itself, and there may be differences in the final product effect of different types of wire colors. Most consumables are matte consumables.